Mild Steel Single Door Encloser

  • Product
  • Mild Steel Single Door Encloser

Mild Steel Single Door Encloser

The MultiMount range of mild steel IP66 wall-mounted enclosures has been designed with the user in mind. Practical, efficient, and with a wide range of standard sizes and accessories available from stock, the MultiMount range offers a solution to virtually every application or can be easily customized to suit specific requirements.

Material: Body: 1.2mm mild steel / 1.4mm MAS0606021R5 and above /1.5mm MAS1001230R5 and above, and 400mm depth enclosure, Gland plate: 1.4mm mild steel. Door: 1.2mm mild steel / 1.4mm MAS0606021R5 and above /1.8mm MAS1006026R5 and above. Mounting plate: 2mm galvanized steel.

  • Features
  • Advantages
  • Body: Folded and seam welded. Four 8,5 mm diameter holes for wall footing, pressed out in 20.4mm diameter x 2mm depressions to allow air circulation around the rear part of the enclosure.

  • Door: Surface mounted with 130 openings. Concealed removable hinges with a captive pin. Hinges can be mounted to allow left or right-hand opening. From height 300mm and above there are studs to mount door profiles MMDP, and from height 600 and above the profiles are Included as standard Sealing is ensured by an injected one-piece polyurethane gasket.

  • Lock: Custom lock with double grip for easy opening of the door. Double-blt 3mm insert and 90 movements. 1000mm high enclosures and above have espagnolette three-point locking.

  • Mounting plate: The mounting plates marked vertically at 10mm intervals for easy horizontal positioning of equipment. On the top and bottom, there are holes to facilitate cable folding. Fixed onto M8 press welded studs to the rear of the enclosure All sides from 800mm and above are strengthened by folded edges.

  • Protection: Complies with IP 6, and NEMA 4, 12, and 13. For outdoor installation, the use of rain hood ARF is recommended, and the corrosion resistance must be taken into consideration.