Benefits
- Reduced outer diameters enable space and weight saving installation.
- Robust against mechanical impacts.
- Reduction of flame propagation and of toxic combustion gases in the event of fire.
- Extruded colour stripe serves as reverse polarity protection during installation..
- Exact quantity control during installation by meter marking on the cable sheath.
Application range
- For the cabling between the solar modules and as extension cable between the module strings and the DC/AC inverter.
- Flexible or building-integrated PV systems.
- Underground use inside protection conduits/ ducts for burial in combined case of (1) secure dissipation of water(logging) from outer cable surface, as well as (2) laying of conduit/ duct in professionally built cable trench with at least 50 cm of back-fill soil (70 cm underneath roads), above indicating tape, above covering plastic slab, above at least 10 cm of covering sand layer, above the conduit/ duct laid on at least 10 cm high sand bed layer (cf.: VDE 0891-6, Section 4.2).
- Not suitable for direct burial, Installation according to IEC 60364-5-52, respectively HD 60364-5-52.
- Long-term permanent storage/ operation in water not permitted.
Product features
- Weather/UV-resistant acc. to HD 605/A1.
- Ozone-resistant according to EN 50396.
- Halogen-free and flame-retardant.
- Good notch and abrasion resistance.
- XLS-R = X-Linked Standard - Reduced Proven electron beam cross-linked quality.
Product Make-up
- Fine-wire, tinned-copper conductor.
- Core insulation made of electron beam cross-linked copolymer.
- Colour of core insulation: white.
- Outer sheath made of electron beam cross-linked copolymer.
- Outer sheath colour: black respectively black with red or blue stripe.